Media Converter RC552-FE 10/100M OAM

PRODUCT DETAIL

          RC552-FE  is Raisecom's latest revised modular 10/100Mbps OAM media converter with 1:1 uplink protection. The media converter is equiped with a 10/100Mbps auto-negotiation UTP interface at client side and two SFP-based fier interfaces at line side. The two uplink is able to work in a 1:1 protected way that the traffi will be switch to the secondary line for transmission whenever the primary line is broken down.

          RC552-FE can either be deployed in a pair or connected directly to an aggregation switch with fier ports. IEEE802.3ah OAM makes the media converter be easily monitored and managed. The media converter works in Raisecom RC001/002 series chassis. With SNMP agent card in the chassis, a pair of RC552-FE can be monitored and network managed on the GUI of Raisecom's NView NNM system. RC552-FE can also be assigned with an indenpendent IP address for web-based management, which provides a easier way for the users to log in the media converter locally or remotely for monitoring, confiuration change and fault removing.
         

Features  
 
  • RC552-FE (B) can save and forward Ethernet service speeds at 10/100M.
 
  • Bandwidth can be configured, on electrical interface Tx bandwidth and Rx bandwidth can be configured separately, with granularity 64K.
 
  • Flexible troubleshooting, providing fault pass between optical interface and the Ethernet electric port as well as ALS.
 
  • Use SFP optical module; in support of digital diagnostic function, dual-optical ports 1:1 protection to realize fault-pass; hot-swapping is available and service modules with different distance and wavelength to meet different needs.
 
  • 802.1Q VLAN, up to 16 VLAN groups.
 
  • QOS, 802.1p priority Remark, add or replace 802.p priority that enters Ethernet packet in accordance with port setting.
 
  • Support Q-in-Q function and can be set to Double Tag and Double Tag TPID.
 
  • In support of basic 802.3ah OAM functionality, SLAVE mode support: OAM discovery, MIB variable response, OAM Loopback, Dying Gasp alarm; MASTER mode support: OAM discovery, OAM Loopback, Remote Dying Gasp alarm instructions; extend custom OAM remote management features, enabling remote device management.
 
  • Dying Gasp function.
 
  • RC552-FE (B) there are two kinds of working mode Master and Slave, central office equipment is the Master, the remote device is Slave; the working mode can be set by DIP. RC002 centralized network management can view the CO/remote information and status, configure CO/remote working mode.
 
  • In support of local Web management, online firmware upgrades can be realized.
 
  • Console port command-line can query device version and MAC, query and set IP, IP mask and Gateway.

**If you need more information,Please contact us.

Related Product